Script started on Sat Mar 9 16:42:42 2019 uaa@framboise:~$ epicon -s 115200 -l /dev/ttyU1 ** Welcome to epicon Version-5.1 Copyright Isamu Yamauchi compiled:Oct 20 2018 ** exec shell ~! send binary files ~f call rz,sz,sx,rx ~rz,~sz,~sx,~rx call kermit ~sk,~rk external command ~C change speed ~c exit ~. Connected /dev/ttyU1 C”UI½½ŃSPL 2019.01 (Mar 09 2019 - 16:22:12 +0900) DRAM: 64 MiB Trying to boot from MMC1 U-Boot 2019.01 (Mar 09 2019 - 16:22:12 +0900) Allwinner Technology CPU: Allwinner V3s (SUN8I 1681) Model: Lichee Pi Zero DRAM: 64 MiB MMC: SUNXI SD/MMC: 0 Loading Environment from FAT... *** Warning - bad CRC, using default environment In: serial@01c28000 Out: serial@01c28000 Err: serial@01c28000 Net: phy interface0 eth0: ethernet@1c30000 starting USB... No controllers found Hit any key to stop autoboot: 0 => dhcp ethernet@1c30000 Waiting for PHY auto negotiation to complete. done BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 DHCP client bound to address 192.168.0.238 (1005 ms) *** ERROR: `serverip' not set Cannot autoload with TFTPGET => ping 192.168.0.1 Using ethernet@1c30000 device host 192.168.0.1 is alive => boot switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... 7577 bytes read in 3 ms (2.4 MiB/s) Found EFI removable media binary efi/boot/bootarm.efi Scanning disks on usb... Disk usb0 not ready Disk usb1 not ready Disk usb2 not ready Disk usb3 not ready Scanning disks on mmc... MMC Device 1 not found MMC Device 2 not found MMC Device 3 not found Found 3 disks 86916 bytes read in 9 ms (9.2 MiB/s) ## Starting EFI application at 41000000 ... >> OpenBSD/armv7 BOOTARM 1.1 boot> sd0: getdisklabel: no disk label booting sd0a:/bsd: sd0: getdisklabel: no disk label 4539540+682840+241368+562448 [299477+120+313392+277556]=0x699d00 OpenBSD/armv7 booting ... arg0 0xc0999d00 arg1 0x0 arg2 0x42d45000 Allocating page tables IRQ stack: p0x409c8000 v0xc09c8000 ABT stack: p0x409c9000 v0xc09c9000 UND stack: p0x409ca000 v0xc09ca000 SVC stack: p0x409cb000 v0xc09cb000 Creating L1 page table at 0x4099c000 Mapping kernel Constructing L2 page tables undefined page type 0x2 pa 0x40000000 va 0x40000000 pages 0x2000 attr 0x8 type 0x7 pa 0x42000000 va 0x40000000 pages 0x5e0 attr 0x8 type 0x2 pa 0x425e0000 va 0x425e0000 pages 0x64e attr 0x8 type 0x4 pa 0x42c2e000 va 0x42c2e000 pages 0x1 attr 0x8 type 0x2 pa 0x42c2f000 va 0x42c2f000 pages 0x100 attr 0x8 type 0x1 pa 0x42d2f000 va 0x42d2f000 pages 0x16 attr 0x8 type 0x6 pa 0x42d45000 va 0x42d45000 pages 0xb attr 0x8000000000000008 type 0x0 pa 0x42d50000 va 0x42d4b000 pages 0x4 attr 0x8 type 0x6 pa 0x42d54000 va 0x42d54000 pages 0x1 attr 0x8000000000000008 type 0x0 pa 0x42d55000 va 0x42d55000 pages 0x2 attr 0x8 type 0x2 pa 0x42d57000 va 0x42d57000 pages 0x1223 attr 0x8 type 0x5 pa 0x43f7a000 va 0x43f7a000 pages 0x1 attr 0x8000000000000008 type 0x2 pa 0x43f7b000 va 0x42d57000 pages 0x85 attr 0x8 pmap [ using 891160 bytes of bsd ELF symbol table ] board type: 0 Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2019 OpenBSD. All rights reserved. https://www.OpenBSD.org OpenBSD 6.5-beta (GENERIC) #24: Wed Mar 6 20:26:39 JST 2019 root@lpizero.uaa.org.uk:/usr/src/sys/arch/armv7/compile/GENERIC real mem = 39714816 (37MB) avail mem = 28749824 (27MB) mainbus0 at root: Lichee Pi Zero cpu0 at mainbus0: ARM Cortex-A7 r0p5 (ARMv7) cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled cpu0: 32KB(32b/l,2way) I-cache, 32KB(64b/l,4way) wr-back D-cache cortex0 at mainbus0 psci0 at mainbus0: PSCI 0.0 sxiccmu0 at mainbus0 agtimer0 at mainbus0: tick rate 24000 KHz simplebus0 at mainbus0: "soc" syscon0 at simplebus0: "syscon" sxiccmu1 at simplebus0 sxipio0 at simplebus0: 52 pins ampintc0 at simplebus0 nirq 160, ncpu 1: "interrupt-controller" "syscon" at simplebus0 not configured sximmc0 at simplebus0 sdmmc0 at sximmc0: 4-bit, sd high-speed, mmc high-speed, dma "usb" at simplebus0 not configured "phy" at simplebus0 not configured "clock" at simplebus0 not configured sxirtc0 at simplebus0 "pinctrl" at simplebus0 not configured "timer" at simplebus0 not configured sxidog0 at simplebus0 com0 at simplebus0: ns16550, no working fifo com0: console dwxe0 at simplebus0: address 02:00:ca:fa:e2:ec ukphy0 at dwxe0 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI 0x001105, model 0x0000 "interrupt-controller" at simplebus0 not configured gpio0 at sxipio0: 32 pins gpio1 at sxipio0: 32 pins gpio2 at sxipio0: 32 pins gpio3 at sxipio0: 32 pins gpio4 at sxipio0: 32 pins gpio5 at sxipio0: 32 pins gpio6 at sxipio0: 32 pins scsibus0 at sdmmc0: 2 targets, initiator 0 sd0 at scsibus0 targ 1 lun 0: SCSI2 0/direct removable sd0: 7588MB, 512 bytes/sector, 15540224 sectors vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets bootfile: sd0a:/bsd boot device: sd0 root on sd0a (25bd418bf7d14629.a) swap on sd0b dump on sd0b WARNING: preposterous clock chip time WARNING: CHECK AND RESET THE DATE! Automatic boot in progress: starting file system checks. /dev/sd0a (25bd418bf7d14629.a): file system is clean; not checking pf enabled starting network dwxe0: bound to 192.168.0.240 from 192.168.0.1 (dc:9f:db:29:8c:6d) starting early daemons: syslogd pflogd ntpd. starting RPC daemons:. savecore: no core dump checking quotas: done. clearing /tmp kern.securelevel: 0 -> 1 creating runtime link editor directory cache. preserving editor files. starting network daemons: sshd smtpd sndiod. starting local daemons: cron. Wed Mar 6 20:40:24 JST 2019 OpenBSD/armv7 (lpizero.uaa.org.uk) (console) login: root Password: Last login: Wed Mar 6 20:35:54 on console OpenBSD 6.5-beta (GENERIC) #24: Wed Mar 6 20:26:39 JST 2019 Welcome to OpenBSD: The proactively secure Unix-like operating system. Please use the sendbug(1) utility to report bugs in the system. Before reporting a bug, please try to reproduce it with the latest version of the code. With bug reports, please try to ensure that enough information to reproduce the problem is enclosed, and if a known fix for it exists, include that as well. You have new mail. lpizero# ping -c3 192.168.0.1 PING 192.168.0.1 (192.168.0.1): 56 data bytes 64 bytes from 192.168.0.1: icmp_seq=0 ttl=64 time=0.988 ms 64 bytes from 192.168.0.1: icmp_seq=1 ttl=64 time=0.666 ms 64 bytes from 192.168.0.1: icmp_seq=2 ttl=64 time=0.769 ms --- 192.168.0.1 ping statistics --- 3 packets transmitted, 3 packets received, 0.0% packet loss round-trip min/avg/max/std-dev = 0.666/0.808/0.988/0.134 ms lpizero# halt reorder_kernel: kernel relinking failed; see /usr/share/relink/kernel/GENERIC/relink.log syncing disks... done The operating system has halted. Please press any key to reboot. Disconnected uaa@framboise:~$ exit Script done on Sat Mar 9 16:44:29 2019